Open-Pit Mining Doesn't Wait for Replacements.
EP400–EP1600 heavy-duty bulk handling series
Crushing operations run 24/7. When a shredded belt stops the line, every idle hour is measured in tonnes lost and contracts missed. Our N17 heavy-abrasion compound and steel-cord reinforced variants are specified for primary crusher discharge, where impact forces peak and material temperatures spike.
FDA 21 CFR. Wet Washdown. Zero Compromise.
FG-W and FG-B food-grade compound series
Food processing environments demand more than chemical resistance — they require absolute traceability, colour coding for contamination control, and surfaces that drain clean under high-pressure washdown. Our FG-W and FG-B compounds are formulated to FDA 21 CFR 177.2600 with no extractable plasticisers.
Clinker at 750°F Doesn't Care About Your Warranty.
HR-series heat-resistant compound · rated to 400°F continuous
Cement clinker exits the kiln at temperatures that destroy standard belts in hours. Our HR compound integrates heat-stabilised polymer matrices with a woven breaker layer designed to prevent delamination under sustained thermal cycling. Specified for cooler conveyor discharge, kiln inlet, and clinker transport to storage silos.
Measured in
Tonnes Per Hour
// PERFORMANCE DATA FROM INSTALLED SYSTEMS
// VERIFIED BY SITE OPERATIONS MANAGERS
Uptime Rate
Aggregate quarry, 72" belt, 18-month service period
Mean Time to Splice
Vulcanized hot splice vs. mechanical field repair
Conveyor Throughput Increase
Food terminal: standard → EP800 low-elongation carcass
Compound
Comparison
Filter by operating requirements. No login required — every engineer deserves access to specification data.
| Grade | Name | Temp Range | FDA | Abrasion Class | Abrasion Loss | Tensile Str. | Elongation | Applications |
|---|---|---|---|---|---|---|---|---|
M | General Purpose | -40°F — 185°F | — | Class B | ≤ 120 mm³ | ≥ 15 MPa | ≥ 400% | AggregateLogisticsGeneral Bulk |
N17 | Heavy Abrasion | -30°F — 212°F | — | Class A (Best) | ≤ 90 mm³ | ≥ 18 MPa | ≥ 450% | MiningQuarryCrushing |
HR | Heat Resistant | -20°F — 400°F | — | Class C | ≤ 200 mm³ | ≥ 12 MPa | ≥ 300% | ClinkerCementFoundry |
OR | Oil Resistant | -35°F — 230°F | — | Class B | ≤ 150 mm³ | ≥ 14 MPa | ≥ 350% | RecyclingScrapMetal |
FG-W | Food Grade White | -40°F — 212°F | 21 CFR | Class B | ≤ 110 mm³ | ≥ 16 MPa | ≥ 420% | Food ProcessingGrainDairy |
FG-B | Food Grade Blue | -40°F — 185°F | 21 CFR | Class B | ≤ 110 mm³ | ≥ 15 MPa | ≥ 400% | Meat ProcessingBakeryBeverage |
ESD | Anti-Static | -30°F — 185°F | — | Class C | ≤ 180 mm³ | ≥ 13 MPa | ≥ 380% | Coal MiningTunnelingATEX |
The Belt
Selection
Guide.
47 pages of compound selection matrices, load calculation worksheets, splice specification tables, and installation tolerances. Written by engineers, for engineers.